PLUMBING & DRAIN SERVICES IN VAUGHAN

Call us if your sump pump runs constantly, makes strange noises or does not appear to be lowering water level in your sump pit. The problem could be with the pump itself, float, check valve, discharge location or volume of incoming water. Sureflow Plumbing & Drain offers sump-pump repair, replacement as well as installation services in Vaughan. Let us know what your pump is doing and if water is currently rising.
A sump system simply pumps away groundwater that collects in a pit. An automatic system turns on when water reaches a particular level and turns off after the water level drops. Just because the motor is running does not necessarily mean there will be adequate reduction in water level.
We diagnose your system instead of assuming a new pump will fix all issues. Obstructed discharge or water that returns to the pit are examples of concerns that may exist even if the motor runs.
Homeowners whose buildings’ drainage systems route groundwater into a sump pit rely on the pump to then move that water away. Not all houses have the same systems or plumbing layouts. The question is whether your property accumulates water in certain areas and if so how it deals with that water.
A properly operating sump system can help keep basement finishes and possessions safe from flooding that involves the collection of groundwater. Sumps do not prevent all types of basement flooding including many that are caused by unrelated leaking pipes or backed-up sewer.
There are several conditions where your sump pump should be checked by a professional. Unusual noises, runtime or water level are three good indicators. Look for strange vibration, frequent cycling, a pump that won’t turn off, leakage from the discharge fitting or water that stays high while the motor is on. Explain how the behavior is different from normal and if it only occurs when it rains.
Schedule service before the pit overflows if possible. Never reach into machinery or step into water surrounding electrical machinery to try to diagnose the issue.
When your sump pump won’t turn on you can suspect an electrical issue, a clogged or stuck float switch or a problem with the motor itself. The sump pump may also be set too high or have debris restricting it from sitting properly in the pit. These are just potential issues that require evaluation. They are not meant to advise you to touch any electrical components near water.
If the water is nearing the top of the sump pit call right away and inform us of the water level. Avoid standing in wet electrical areas.
If your sump pump runs constantly there could be heavy inflow seeping into the pit, an issue with the float switch, clogged discharge, water returning to the pit or a sump pump that cannot keep up with the water. If it has recently changed from how it normally runs, that is important to know. Installing a new pump without inspecting the entire discharge and controls can leave you with the same problem.
Let us know if the water ever lowers while the pump is on and how long the issue has been going on.
If your pump turns on and off rapidly, it’s cycling. Cycling causes undue wear and tear on a pump. The switch setup, size of the pit, and water flowing back into the pit via the discharge are some reasons why your pump cycles. A float can be too sensitive and activate too frequently. A faulty check-valve can force the pump to run repeatedly pumping the same water over and over.
Give us an approximate time frame of how often your pump comes on. Also, does the water level rise again right after it shuts off? System evaluation is more beneficial than assuming something is wrong with just the motor.
All pumps make some noise when operating. However, if you notice new grinding, rattling, loud vibrations or it’s suddenly louder than normal there could be an issue. The problem could be with the motor itself, the impeller, a loose wire or connection, the discharge piping or foreign matter in the pit.
Tell us when the noise happens. Is it when it first starts pumping, while it’s pumping continuously or when the water in the pit stops flowing. Don’t try to take the unit apart or stick your hand in the pit to try to find out what it is.
The water level should go down when pumping. If water continues to rise there are several reasons. Your pump may not be turning on, the discharge could be clogged, or too much water is entering the pit. If your pump motor is running that does not mean everything is working properly. Contact us immediately if the water is rising to the top or begins overflowing. Stay away from any electrical areas that may be flooded.
Discharge route problems – Water is pumped out through the discharge pipe. A clog, leak, disconnection, frozen pipe or inappropriate trajectory can hinder performance. Water flowing back toward the foundation means the pump may end up re-circulating that water. Consider the entire path of the discharge pipe, not just the portion visible above the pit.
If your pump motor runs without lowering the water level, observe any noticeable leaking or behaviour of the discharge. Never disconnect piping or interfere with electrical components if it means entering unsafe areas. We inspect the route and connections to determine what can be repaired.



Your failing sump pump may not need to be replaced. A faulty float switch, check valve, connection or discharge line could be the culprit. Sureflow assesses residential and commercial sump systems throughout Vaughan. We will explain our findings and provide recommendations on repair or replacement.
Share any previous repairs with us and describe what you normally expect from your pump’s performance. Accessibility to the pit, condition of the equipment and availability of parts all factor into our ability to repair. Ideally, repairs target the root issue rather than just getting the motor to run. We take note of whether the system is clearing water from the area effectively and if other issues should be considered.



Replacement becomes an option when the motor has died, repairs are a constant nuisance or the pump just doesn’t perform reliably for the intended system. The discharge location, controls and incoming water should be inspected as well. Failure to keep up could be caused by more than one issue.
The replacement should match both the installation conditions and pumping requirements. We will not presume that every house in Vaughan needs the same model number or that simply upgrading to a larger pump means “it won’t happen again”. Tell us about past problems and alterations made to the drainage setup.
There isn’t a set number of years that every pump will work. Runtime, workload, unit quality, maintenance and system conditions play a role in how long it will last. Age can be a helpful starting point, but current performance and history of failure are important factors when determining your next steps.
Just because an older pump works, doesn’t mean it will handle a heavy inflow situation. Likewise if your newer pump is giving you trouble, that doesn’t mean everything else is fine. Inquire about the age of the controls, check valve and condition of the discharge piping as well as the motor. We can inspect your current unit and talk through any concerns about its ability to continue working without guaranteeing a specific remaining service life.



Installation entails having the appropriate system for the property in question. Collection pit, pump, controls, discharge and check valve (where applicable) all require review as does the routing and destination of the discharge water, along with practical access and required connections. A sewage pump is not a sump pump. Do not use the wrong equipment for the job.
We need to know about existing drainage arrangement as well as what you plan to do if we are going to provide advice for either a basement renovation or new installation. We need to evaluate the site conditions before we can make any recommendations for equipment. Details about the installation as well as any project requirements need to be confirmed and not guessed based on what your neighbour did.
The float control will react to the water level and activate the pump at its cut in and cut out settings. A float stuck in the wrong position can cause a pump not to start or run continuously. The float switch movement and position must be correct for whatever equipment is installed.
A check valve on the discharge can reduce or eliminate water pumping back down the discharge pipe after the pump shuts off. If the check valve malfunctions, the water can flow back into the sump pump pit and cause short cycling. There can be other causes for this condition. Both the check valve and controls should be looked at together along with how the discharge is piped. We want to pump out incoming water not pump the same water over and over inside the system.
Battery backed systems can supply some or all of the needed pumping during a power outage depending on design, condition and charge remaining. Water and power outages often occur during storms so backup can be considered where needed to keep a property protected by a sump system.
Backup pumping does not guarantee there will be no flooding. Age and maintenance of battery backups, their pumping capacity and length of power outage are important factors. Like any equipment it should match the application and expected demand. Inquire about how the intended backup system works. What maintenance or testing does the manufacturer specify?
Systems can be installed with one intended as primary and a second to assist or be utilized as backup. During a power outage what happens depends on how that backup pump is powered. Two electrically powered pumps using the same circuit will not automatically provide backup during an outage.
The best option depends on the sump pit, available space, discharge configurations and expected water heading to the pit. Describe any past water issues related to power outages. Does your primary pump have difficulty keeping up with heavy incoming water? We can evaluate what you have and discuss suitable upgrades. A backup system is intended to support a properly working primary system. It should not be used as an excuse to avoid clearing a blocked discharge or repairing a control fault.
Look over your system before it is needed most. Know where it is located, keep access to service clear and be aware of any differences in operating noises or ability to pump water away. Consult your installed equipment’s manual for routine maintenance tips. If you have concerns about safely running tests or the current condition of your system schedule a professional inspection instead of experimenting around electrical equipment and water.
A review before spring melt or anticipated heavy rainfall may help identify a potential issue. It won’t ensure your system will never fail you, but it will allow you to take care of any problems before the pit is full.
Maintenance doesn’t stop at listening for the motor to turn on. The pump itself, movement of the float, condition of the pit, discharge area, check valve, visible piping and connections, and any backup system you have will all play a factor in how your system operates. Objects in the pit or a stuck float can affect a pump that has worked perfectly fine up until now.
Consult your manufacturer’s recommendations as well as any history of your property when evaluating what checks and maintenance should be performed. Maintain a record of recurring issues, repairs, and unusual pump cycling. In a condo or rented building with shared walls or access determine who is responsible for maintaining and accessing your sump pump. If you notice an issue be sure to let them know if you have standing water currently so they can prioritize based on your needs. One good cycle is not an indication that all parts are functioning properly.
Melting snow and rain can cause an increase in water flowing into a sump system. When the weather turns warmer a pump that saw little use during the winter can experience continuous use. Seasonal fluctuations in Vaughan are a logical time to evaluate installed equipment. Avoid generalizing that every neighbourhood has the same ground water issues.
Observe how the system performs and take note if the water level drops during a pump cycle. Arrange for service if the pump becomes noisy, begins to short-cycle or cannot keep up. Include the discharge piping in your review of the system.
As the name implies, heavy rain will often add to the water flowing into a sump pit. Call if the level continues to rise even with the pump running or the pump fails to turn on. A blockage or malfunction may need to be cleared, along with consideration to how much water is entering.
A sump pump evacuates groundwater which has accumulated in a sump pit. A backwater valve helps prevent sewage from flowing backwards up a drain connection. Each device mitigates different issues. Both could be installed on a property, but a sump pump will not clear a stopped up sewer and a backwater valve will not pump water out of a pit. Properly identify where the water in the basement is coming from before deciding on a solution.
Flooring, drywall, furniture and stored items can be damaged when a sump pit floods. Ensure you know where your sump equipment and service access is located if your finished basement requires a sump system. Don’t bury the pit under permanent finishes or storage that prohibits servicing.
If possible, discuss erratic operation before it becomes an issue during a heavy rain event. Even an existing pump should be evaluated based on its condition and performance. An older pump may still work, but its condition and performance need assessment; installation alone does not guarantee protection.
Sureflow offers residential sump-pump assessment, repair, replacement and installation services in Vaughan. Sump access may vary based on the setup in houses, townhomes, basements or crawl spaces.
Share any information you know about existing equipment, past issues or if groundwater is presently entering the pit.
The failure of a pump can impact any commercial basement, storage room or mechanical room. Sureflow provides plumbing and sump-pump service to Vaughan businesses and property managers. Buildings in Concord, Ontario can also arrange service. The building’s layout, equipment usage and access determine what work can be done.
Leave us a maintenance phone number, any equipment records and information on alarms or previous faults if possible. For a condominium or multi-family building, contact building management. We will need to assess the system before determining if repairs are possible or suggest replacement.
Once water enters the pit and there isn’t enough discharge capacity, the level will continue to rise until it overflows. How quickly this happens depends on how much water enters the system and its condition. If your pump fails during heavy rain, an emergency can happen in a matter of minutes. Just because a pump makes noise or runs does not confirm that it is pumping an adequate volume of water.
Contact Sureflow if you see water rising in the pit, nearing the top of the pit, your pump won’t start or your discharge is ineffective. We offer emergency plumbing services 24 hours per day in Vaughan. Stay away from flooded areas around outlets, extension cords or other electrical equipment.
Don’t use equipment if you are standing in water.
This depends on what we find during our diagnosis, condition of the equipment, history of repeated failures, how well the pump is performing and condition of related components. Repairing a suitable component could be a viable option. If your pump has failed or is questionable at best, we may suggest replacing it.
We like to evaluate the entire system rather than assume that installing a new motor will correct every problem.
Dial 905-605-6845 to speak with someone about sump pump service in Vaughan. This includes Woodbridge, Maple, Concord, Kleinburg and Thornhill. Let us know if the pump is starting, how long it runs for and if the water is receding. Please use our appointment form for non-emergency requests. If you have water rising or entering your basement, please call immediately.
It should turn on when the water level rises and lower the water level according to how it’s set up to cycle. Listen and watch from a safe distance. The motor can run while water is not being removed effectively. Schedule service if the water stays high or the behavior is erratic.
Heavy incoming water, control issues, a restricted discharge line, water flowing back into the sump pit or a pump that cannot keep up with demand are all reasons a pump might run continuously. Let us know if the water level goes down and whether this is a new problem. The entire system may need to be checked before determining if the pump needs to be replaced.
All pumps make some noise. However, if you notice new grinding, rattling or vibration, there may be cause for concern. The motor, impeller, discharge piping or debris in the pit could be the culprit. Let us know when the noise occurs and refrain from reaching into equipment or standing water.
A properly sized backup pump can offer protection if your power goes out or your main pump fails, but it depends on the equipment you have. It also doesn’t guarantee your basement will stay flood-free. Discuss age, maintenance requirements, capacity and installation needs to determine if one would be beneficial to your home.
Life expectancy depends on usage, run-hours, maintenance and system factors. Every pump is different, there is no standard expiry date or predicted remaining lifespan. Evaluating present performance and failure history is more relevant than age alone when determining whether to repair or replace.
It may keep basement water at bay by pumping away groundwater which has accumulated in the sump. The pump must be working properly and have adequate capacity. Not all sources of water in a basement can be prevented by a sump pump, such as sewer backup, surface water or unrelated leaks from within the house. Determine the cause before assuming the sump pump can solve your problem.
Yes. Sureflow provides Vaughan homeowners and businesses with sump-pump repair, replacement and installation. Describe the existing equipment, access to the area and any symptoms you’ve noticed. A recommendation can’t be provided until we evaluate the fault and inspect the rest of the system, like the controls and discharge.
Yes. Sureflow offers emergency plumbing services 24-hours a day. Contact us if your pit is close to overflowing, the pump won’t start or you notice water coming into the basement. Stay away from flooded electrical areas and don’t touch equipment if you’re standing in water.



