A tap that suddenly only drips on a cold day in Barrie is something you should look into. It could be a frozen pipe especially if it’s located on an outside wall. Check for leaks, locate your main water shut-off and see if it is just one tap or your whole home. If water is leaking outside the pipe, shut your water off only if you can access the main safely, and call a plumber. Never attempt to thaw a pipe that is leaking or you think may be damaged.
Determine if it is only one tap
Try another tap that uses cold water. Is the hot water also affected? If one tap in your kitchen is not working and all others are fine it could be something else. A clogged aerator, a valve that is not open or an interruption to your water supply can also reduce flow. Keep these in mind when speaking to your plumber.
Look for any visible pipes that may be affected. You don’t have to dig through your walls or move your fridge to check this. Just know where pipes run in your home and if any rooms have been colder than others or if there was a power outage or your furnace stopped working.
If all your neighbours are experiencing no water it may be your water service. Find more information on the City of Barrie Water Operations page to learn more about your water service and meter. There is information on how to contact the city about your water service if you think you have an issue. Always leave your curb stop to the city if you have an issue with your water.
If you have a plumbing issue inside your home it may require different assistance.
Treat visible pipe damage and active leaking as urgent
A bulging or split pipe, wet drywall or water appearing below a ceiling means you need to focus on containing the leak rather than restoring the faucet. Always use a dry and safe path to reach your main shut off. Never cross over water to get to a valve or breakers. If water may be touching wiring, outlets or electrical equipment, stay out of the affected area and arrange appropriate emergency help.
Your main shut off valve may be near the water line coming into your basement. Its location can vary from home to home. Don’t force your shut off valve if it’s stuck. Let your plumber know if your valve will not shut off your water. Sureflow can help you with shut off valve replacement in Barrie.
Remove items that are safe to reach from dry areas. You can use buckets to catch a drip that you can safely reach. Do not stand under a sagging ceiling or get into a water damaged area. Take pictures of the damage if you can do so safely.
Ice can cause your leak to be hidden. That is why you should stay nearby during any safe thawing attempt. Stop thawing if you notice water leaking outside the pipe. Frozen and burst pipe repairs should address damaged sections as well as the loss of flow. Turning the water back on before damage is assessed can restart a leak.

When gentle warming may be reasonable
Only if you can see the pipe and know it is not damaged and it is located in a dry area should you attempt to thaw it. If you don’t know where it’s frozen or can’t keep an eye on it or don’t know what it goes to you should call a plumber. Don’t try to find your pipe by tearing into walls or trying new methods that you’re not comfortable with.
If it is just one small area you can always heat the room around it. Allow warm air from your home to reach the pipe. If you have a cabinet under a sink you can open that up to allow the warmth from your house to get to the pipe. Make sure any cleaners are out of reach of children and close the cabinet when you are done.
The City of Toronto’s frozen-pipe guidance describes gentle thawing precautions. The Red Cross also describes warming methods such as warm towels. Never use an open flame. You want to leave the faucet open a tiny bit when thawing. Don’t use boiling water or a torch. Don’t leave anything unattended that could heat your pipe. If there is moisture in the area you are working in please call a professional. Electrical items and water don’t go together.
How long it will take to thaw your pipe is hard to say. It depends on many factors. You may end up causing more damage by trying to heat your pipe more. If the pipe is hidden, underground or repeatedly freezing, call a plumber rather than trying a different thawing method yourself.
If you hear unusual sounds, see water leaking outside a pipe or notice a bulge, stop and call your plumber. They can inspect your pipe before it starts flowing again. Make sure you know where your shut off valve is at all times.

When to Call
Call if you cannot see the frozen section, multiple areas are affected, your home has lost heat or you cannot operate the main shut-off valve safely. If you have no water at all it’s also worth looking into as there can be other reasons you have no water. Don’t assume it will thaw safely on its own when it warms up outside the next day.
Let them know what you noticed was different. Explain which fixtures have stopped working, whether hot and cold water are affected, which taps still work and whether you see damage. Mention recent work on the property or a wall where pipes have frozen before. All of these will help when deciding what to look for.
Say you have a kitchen tap on an exterior wall and it stops working overnight. But the tap in your basement laundry still works. That pattern would point to a more localized investigation. If you notice staining under that kitchen the next day it becomes a more urgent situation. This is an example of symptoms to report, rather than a diagnosis of your home.
Sureflow offers emergency plumbing service in Barrie if you have an active leak or burst pipe. You can ask what you should do in the meantime when you call. Do not rely on an assumed arrival time or try increasingly aggressive thawing methods while waiting.
If you rent or live in a condo make sure to let your landlord know as well. You may need to coordinate with your shut off if you have multiple units in your building. Do not operate shut-offs serving other units without authorization from the person responsible for the building.
After flow returns, check what caused the freeze
Having flow is a good sign, but it does not explain why the pipe became cold enough to freeze. Once you have flow inspect any areas that you can access for signs of moisture. You may find a new leak or drip once you start using your water again. If there is a new leak or damp area do not try to conceal it. Sureflow offers leak repair services in Barrie for problems that become apparent after thawing.
Make a quick note of what fixture froze and the conditions outside. Also note whether your home lost heat. This can help you if you experience freezing pipes in the future. If your pipe freezes in the same location each time there may be a cold draft hitting that area or the pipe may be located outside of your home’s heated envelope. Maybe there is a room that is not staying warm enough. Adding pipe insulation will not produce heat.
Once you have identified what is causing your pipes to freeze you can take measures to correct the issue. It could be as simple as sealing a draft or making sure your home is staying warm. Some situations may require moving your plumbing lines or speaking with a professional. If your situation involves walls or adding heat products speak with a professional that knows what they are doing. Make sure you read instructions for any products you install.
There is no one fix that will work for every home. Keep your home warm during the winter months. Do not assume a dripping tap or a single thermostat setting will protect every pipe. Precautions should suit your actual plumbing and heating system.
If you have questions about your frozen pipes call Sureflow Plumbing & Drain 705-503-7996. We can help you with any questions you may have about your frozen pipes or plumbing service in Barrie. If you are experiencing a leak or have a broken pipe we recommend calling a professional as soon as possible.
